Setup:

• STEP 1: Start with a clean Paper Disc on the Turntable, secured with the Outer Ring, and positioned on the HypnoGraph Base.
• STEP 2: Place the 45 Gear in the bottom right slot of the HypnoGraph Base. Be sure the Gear connects with the Turntable Gear. Secure a Gear Spindle with the Spindle Tightener tool.
• STEP 3: Place the Gear Crank Handle in the center hole of the 45 Gear. Turn the Gear to make sure the Turntable Gear spins smoothly.
• STEP 4: Place the 36 Gear on the right side of the HypnoGraph Base, in the third slot, connecting the teeth with the 45 Gear. Secure a Gear Spindle with the Spindle Tightener tool.
• STEP 5: Place the T-Arm-to-Gear connector in the center hole on the 36 Gear.
• STEP 6: Turn the connector to be sure that the parts are aligned.
• STEP 7: Place the 47 Gear on the left side of the HypnoGraph Base, in the second from the top slot. Slide the Gear to connect it with the Turntable Gear then secure a Gear Spindle with the Spindle Tightener tool.
• STEP 8: Place the T-Arm-to-Gear connector in the third hole of the 47 Gear and spin the Gear to test.
• STEP 9: Assemble the Pen Holder and T-Arm, with the T-Arm numbers at the bottom. Secure the Pen Holder positioned at the number 4 and the T-Arm at 9.5
• STEP 10: Attach the T-Arm to the Connectors positioning the T-Arm with the 47 Gear as the Sliding Gear.
• STEP 11: When the setup is complete, click the pen and turn the Gear Crank Handle to draw a beautiful 5-loop design.