Setup:
- STEP 1: Start with a clean Paper Disc on the Turntable, secured with the Outer Ring, and positioned on the HypnoGraph Base.
- STEP 2: Place the 44 Gear in the bottom right slot of the HypnoGraph Base. Be sure the Gear connects with the Turntable Gear. Secure a Gear Spindle with the Spindle Tightener tool.
- STEP 3: Place the Gear Crank Handle in the center hole of the 44 Gear. Turn the Gear to make sure the Turntable Gear spins smoothly.
- STEP 4: Place the 38 Gear in the top right slot of the HypnoGraph Base, connecting the teeth with the Turntable. Secure a Gear Spindle with the Spindle Tightener tool.
- STEP 5: Place the T-Arm-to-Gear connector in the center hole on the 38 Gear .
- STEP 6: Turn the connector to be sure that the parts are aligned.
- STEP 7: Place the T-Arm-to-Base Connector part in the 8 position.
- STEP 8: Assemble the Pen Holder and T-Arm, with the T-Arm numbers towards the top. Secure the Pen Holder positioned at the number 4.5 and the T-Arm at 13
- STEP 9: Attach the T-Arm to the Connectors positioning the T-Arm with the 38 Gear as the Sliding Gear.
- STEP 10: When the setup is complete, click the pen and turn the Gear Crank Handle to draw a beautiful 30-loop design.